03/2002 Isuzu FY FVZ Cab Chasis/ RG Crane Borer/ Pendulum
KEY FACTS
03/2002 Isuzu FY FVZ Cab Chasis / RG Crane Borer/ Pendulum
Make:Isuzu
Model:FVZ 193A
Date of manufacture: 03/2002
VIN: JALFVZ23SY3000116
Tare weight: 19,131kg
GVM: 24,000kg
GCM: 36,000kg
Approval: 25552
Category:NC
Seats: 3
ENGINE: SITEC 275 (ISUZU 6SD1-TC)
- Type: 6 cylinder, 4 stroke, SOHC, direct injection diesel.
- Variable Geometry Turbocharger (VGT) and air-to-air intercooler
- Adjustable roller type rocker arms.
- Displacement: 9,839 cc
- Compression Ratio: 16.0:1
- Bore x Stroke: 120 x 145 mm
- Max power (DIN NET): 206 kW @ 2,000 RPM
- Max torque (DIN NET): 1030 Nm @ 1,400 RPM
- Emissions Standard: ADR 80/00 (Euro III)
- Plate type oil cooler. 28.4 L oil capacity.
- Separate full flow main filter and bypass oil filter.
COOLING SYSTEM
- 6 blade, 600 mm diameter cooling fan with thermostatically controlled viscous clutch. Dual drive belts.
- 29 L coolant capacity.
FUEL SYSTEM
- Denso common rail fuel injection. Separate fuel filter and water separator.
- 400 L aluminium tank (Long models).
- 180 L steel tank (FVZ Medium, PTO & Auto models).
TRANSMISSION
- EATON RT-7608LL 10 Speed manual
- 10 forward speeds. Direct drive.
- Repeat ‘H’ shift pattern.
- 11.1 L oil capacity.
- SAE PTO opening on RHS and bottom of transmission case.
CAB INTERIOR
- Isringhausen ISRI 6500/517 air suspension driver’s seat, auto weight adjustment to 130 kg.
- Reclining passenger bucket seat. Centre seat with folding seat back
- 12 Volt, 100 Watt and 24 Volt, 2 pin accessory sockets located in centre console.
- Electric windows.
- Central locking with remote keyless entry.
- Centre facia pullout drinks holder. Lockable centre storage compartment.
- Heater/Demister with 4-speed fan and outlets for windscreen, side windows, face and floor.
- Standard fully integrated air conditioning.
- Remote seek/volume and mute switch located on dash to right of steering wheel.
Truck features
- Fitted with Bullbar
- Fitted with winch on front bullbar
CRANE BORER DETAILS AND COMPONENTS
- Jacklegs
- Sub-frame
- Automatic accelerator system
- The truck engine is automatically accelerated via a 2-stage system which can be sped up via a switch at the operator’s console for easy and convenient operation.
- Slew bearing and gear
- Hydraulic slew coupling and Electric slew coupling
- Main boom and Pivot
- Load Monitor
- Pole Claws
- Auger Drive
- Auger Align System
- Control Console
BASIC SPECIFICATION:
- Maximum Height 16,200mm
- Maximum Hook Height 15,600mm
- Maximum reach 13,100mm
- Maximum SWL (Double Fall Rope) 10,000kg
- Maximum SWL (Single Fall Rope) 5,000 kg
- Winch linepull (bare drum) 6,800kg
- Winch rope 16mm 50 metres
- Boring Radius, minimum 5,100mm
- Boring Radius, maximum 8,240mm
- Auger speed range (variable) 0-62 rpm
- Step 1(Screw anchors 0 - 16 rpm)
- Step 2 (Auger 0 - 38 rpm)
- Step 3 (Auger Spin-off 62 rpm) - Maximum auger torque 18,600Nm
- Front and rear out and down jacklegs spread to centre of pad 4,820mm
- 360° Pole Grips Fitted
- Electronic Load Monitor fitted
- Maximum Slew Arc Continuous
- Traveling Height (typical) 4,000mm
- Overall width 2,500mm
- Overall length (typical) 9,250mm
- Approximate Speeds: Fully raised to maximum height 45-60 seconds
- Approximate Speeds: 360° Slew 35 seconds
CONDITION REPORT
This is a very well maintained vehicle with all records stating how well the mechanics of it has been looked after.
Electrical installation company that work from Sydney to up past the mid north coast .
This truck has just had the 10 year Certification done, so 8 years remaining on this truck .
No faults with the mechanics at all and is from a working environment.
Service records with it have all minor details of any repairs done by the company .
Tested and driven by ALLBids staff .
Some minor marks and scratches but fitting with the type of work this truck is used for.
Some dirt inside Cab also fitting with type of work used for , no torn seats or damage to dash .
Interior
Minor marks and scratches from normal usage
Exterior
Some scrapes and scratches from normal usage
Front Tyres
Apprx. 80% Tread Remaining
Rear Tyres
Apprx. 80% Tread Remaining
Service History
Full Service History
Keys Included
2
Mechanical inspections
We welcome any independent party to inspect motor vehicles on your behalf. This is highly recommended in the case you cannot see the car yourself.
The information is intended as a guide only and ALLBIDS gives no guarantee or warranty about the accuracy of the information contained within. You must ensure you have read, understood and agreed to the Terms and Conditions for Buying at Auction which include confirmation that vehicles are sold “as is, where is” with all faults (if any) and you must independently verify information which is important to your purchasing decision.
Vehicle Overview
Apprx. 80% Tread Remaining
Apprx. 80% Tread Remaining
Registration
Expiry 15/06/2024
Item Location
Inspection Details
Collection Details
You will be required to collect the vehicle from PORT MACQUARIE NSW 2444.
You can also organise your own courier or contact our Trusted Vehicle Transport Partner below:
![](https://abstorageeastaus.blob.core.windows.net/auctions/logo/carways-allbids-getaquote.jpg)
Contact Carways for a quote
Click here to get a quote online
Or phone: 1300 227 929
{{auction.aucCurrentBidder}}
GST is included in the final bid price
ID Verification Required
Please click on Start Verification button below and complete the process.
ALLBIDS cares about your privacy. Your data will only be used for verification purposes. Your data is encrypted and stored within secure environment. Please read our Privacy Policy if you have any questions.
Warning
(02) 6239 2262
admin@allbids.com.au
Bid History
{{bid.amount.toFixed(0) | currency:undefined:0}}
(Max: {{bid.proxyamount.toFixed(0) | currency:undefined:0}})
|